Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Trusted Dryer Vent Cleaning for Fairfax Homeowners
Dryer vent cleaning in Fairfax typically costs $180-$340 for a standard single-family home and takes 60-90 minutes from arrival to photo documentation. CleanRun Air Duct Cleaning Fairfax has performed this service in more than 52,000 homes since 2013, every one with a written price agreed before work started and a documented photo record delivered afterward. We’re independently owned and operated under the Haven Standard, led by Tomas Reyes, and we serve Fairfax homeowners with the same equipment roster we have used since our first job: Rotobrush, Nikro, Abatement Technologies, and Guardsman systems, named here so you can verify specifications before we arrive.
The risk of a clogged dryer vent is not abstract. In Fairfax’s older neighborhoods like Mantua and the subdivisions off Route 50 built between 1985 and 2005, we regularly find vent runs exceeding 25 feet with multiple elbows, lint compaction at the second or third turn, and bird nesting in caps without guards. The camera shows it; the photo record documents it; the written price covers the full scope before a single panel comes off. If you’re noticing longer dry times, a hot laundry room, or lint collecting behind the dryer, the vent is telling you what it needs. Call (571) 526-0015 and we’ll put a written estimate in front of you, no obligation.
What Our Dryer Vent Cleaning Service Includes
Dryer Vent Inspection
Every job begins with a full visual and camera Dryer Vent Inspection of the vent run from the dryer connection to the exterior cap. In Fairfax, where many homes in Kings Park West and Greenbriar have vent runs routed through crawl spaces or finished basements, we use a borescope to document the interior condition of each elbow and straight section. The inspection identifies lint depth, moisture damage, improper slope, disconnected joints, and animal intrusion. You receive these images as part of the standard Documented Photo Record before any cleaning begins, so the scope of work is visible and agreed in writing under Haven Standard Clause 1.

Vent Cleaning
Vent Cleaning is the mechanical removal of lint and debris from the full length of the dryer exhaust duct using negative-pressure extraction and rotary brush systems. We match the tool to the duct material: flexible foil or vinyl in older Fairfax townhomes near Fairfax Circle, rigid metal in newer construction off Fairfax County Parkway, or semi-rigid aluminum in most single-family builds. The Rotobrush system agitates adhered lint while the Nikro negative-air machine captures it at the source, preventing redistribution into the home. Every run is photographed after cleaning to verify clear passage, and those images are delivered with your job record.

Lint Removal
Lint removal addresses the compacted material that accumulates at elbows, in horizontal runs with inadequate slope, and behind the dryer where the transition duct connects. In Fairfax’s humid summers, we’ve found that lint absorbs moisture and hardens into a dense mat that restricts airflow by 40 percent or more before the dryer even signals a problem. Our technicians remove the transition duct, clean the dryer’s internal lint chute with specialized tools, and verify that the exterior damper opens fully under dryer operation. This is not surface cleaning; it’s full-system restoration of airflow capacity.

Vent Rerouting
Vent rerouting is required when the existing path is too long, has too many elbows, or terminates in a location that violates IRC guidelines or creates a recurring blockage risk. We’ve rerouted vents in Fairfax homes where the original builder ran 35-foot paths through unconditioned attics, or where additions have made the exterior termination point impractical. Rerouting uses solid metal duct with proper support, sealed joints, and a termination cap suited to the new location. The work is priced in writing before we cut a new path, and the installation is photographed and documented like every other service we perform.

Bird Guard Installation
Bird guard installation prevents nesting in the exterior vent cap, a common issue in Fairfax where starlings and house sparrows favor the warm, sheltered cavity of a dryer vent termination. Our Guardsman bird guards are designed to allow full exhaust airflow while blocking entry; they install without modifying the existing cap in most cases. We recommend this addition in neighborhoods with mature tree canopy, particularly near Daniels Run and Accotink Creek watersheds where bird pressure is highest. The guard is photographed after installation and covered under the 365-Day Done Right Promise.

Vent Cap Replacement
Vent cap replacement becomes necessary when the existing cap is damaged, missing its damper, or designed without proper backdraft prevention. In Fairfax, we still find original caps from the 1980s and 1990s with flimsy plastic louvers that stick open or closed; these allow cold air infiltration in winter and provide no barrier against pests. We install metal caps with gravity-operated dampers or spring-loaded designs appropriate to your siding type and local wind exposure. The replacement is itemized in your written price and photographed as part of the standard deliverable.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Dryer Vent Cleaning

We’ve serviced and cleaned vent systems connected to every major dryer manufacturer installed in Fairfax homes over the past twelve years. For Whirlpool and Maytag units, which represent the majority of installations in the 2015-2025 build cohort throughout Fairfax County, we stock replacement transition ducts and elbows that match OEM specifications. We’ve also worked extensively with LG and Samsung vent configurations, including the extended-depth models popular in newer townhome developments near the Vienna Metro corridor where space constraints require precise fitting.
Whether your dryer is Bosch, GE, Electrolux, Miele, or any other make, we can inspect, clean, and restore the vent path to manufacturer airflow requirements. Our equipment roster includes Rotobrush and Nikro systems sized for duct diameters from 4-inch residential to 6-inch commercial, and we carry Abatement Technologies HEPA filtration for jobs where indoor air containment is a priority. If you’re unsure whether your vent configuration is standard or custom, the inspection will show us both, and we’ll put the scope in writing before any work proceeds.
Before
AfterSigns You Need Dryer Vent Cleaning Right Now
- Clothes take more than one cycle to dry. This is the most common symptom Fairfax homeowners report, and it indicates that airflow has dropped below the threshold for efficient moisture evacuation. The lint layer inside the duct acts as insulation, trapping humid air in the drum and forcing the dryer to run longer while using more energy.
- The laundry room feels unusually hot or humid during dryer operation. When exhaust air cannot exit through the vent, it leaks at connection points or backs into the room. In summer months in Fairfax, this added heat load strains your air conditioning and creates condensation on cool surfaces.
- You smell burning or scorched lint when the dryer runs. Lint is highly combustible, and restricted airflow causes the dryer to operate at higher internal temperatures. The U.S. Fire Administration identifies clothes dryer fires as a leading cause of residential fire loss; in Fairfax County, fire departments respond to multiple dryer-related calls annually, many traced to vents that have not been cleaned in years.
- Visible lint accumulates behind the dryer or around the exterior cap. This means exhaust air is escaping before the termination point, either because of a blockage forcing back-pressure or a disconnected joint in the transition duct. Either condition wastes energy and creates a fire hazard in the confined space behind the appliance.
- The exterior damper barely opens or stays closed during dryer operation. A healthy vent system produces enough airflow to lift a gravity damper fully open. If the flapper moves only slightly or not at all, the duct is obstructed, crushed, or improperly designed for the dryer’s output capacity.
Our Dryer Vent Cleaning Process - Step by Step

- 1
Arrival and System Assessment. Our technician arrives in a marked vehicle, identifies themselves by name, and begins with the dryer’s operational status: cycle time, heat level, and any symptoms you’ve noticed. We then disconnect the transition duct and insert a borescope to capture the interior condition of the full vent run. These images are saved to your job record and reviewed with you before pricing.
- 2
Written Scope and Price Agreement. Under Haven Standard Clause 1, we deliver a written price for the exact work required before any cleaning begins. This includes the vent length, number of elbows, access difficulty, and any additional services like bird guard installation or cap replacement. You approve the scope in writing; we do not proceed on verbal agreement alone.
- 3
Mechanical Cleaning with Documented Agitation. Using Rotobrush rotary tools matched to your duct diameter, we agitate lint from the interior walls while the Nikro negative-pressure extraction system captures debris at the source. For rigid metal ducts, we may also use compressed air whips to dislodge compacted material at elbows. The process is repeated until the borescope shows clear passage through the full run.
- 4
Component Cleaning and Reassembly. The transition duct, exterior cap, and dryer’s internal lint chute are cleaned separately with appropriate tools. We verify that the exterior damper operates freely, that all joints are resealed with metal tape (never screws that catch lint), and that the dryer is reconnected with proper strain relief.
- 5
Final Verification and Photo Documentation. We run the dryer on air-only cycle and measure exhaust velocity at the cap to confirm restored airflow. After-and-before photographs of every duct section are compiled into your Documented Photo Record, delivered as a standard part of the job. The 365-Day Done Right Promise is activated in writing before we leave.
How Much Does Dryer Vent Cleaning Cost in Fairfax?
A standard dryer vent cleaning in Fairfax runs $180-$240 for a single-story home with a straight or moderately elbowed vent run of 15 feet or less; see our Dryer Vent Cleaning cost guide for full pricing details. Homes in neighborhoods like Fairfax Farms or Random Hills with longer runs, roof terminations, or multiple elbows typically fall in the $260-$340 range. Vent rerouting, bird guard installation, or cap replacement are priced separately and itemized in writing before work begins.
Several factors move the price within these ranges. Roof access for termination cleaning adds time and safety equipment; crawl space routing requires additional protective measures; and compacted lint that requires extended agitation increases labor. What does not affect the price is the number of vents, because dryer vent cleaning is priced per system, not per outlet. This is Haven Standard Clause 1: one flat price per system, agreed in writing, with no per-vent add-ons or post-arrival upsells.
To avoid overpaying, request that any quote specify the duct length, elbow count, and whether the price includes the transition duct and exterior cap. A legitimate Fairfax vent cleaning service should also describe its extraction method. Shop vacuums and leaf blowers do not achieve negative-pressure containment and can force lint into wall cavities. Our estimate includes the full scope, the equipment to be used, and the documentation you’ll receive. Call (571) 526-0015 for a written estimate; there is no charge and no obligation to proceed.
Dryer Vent Cleaning Near Fairfax - Our Service Area

CleanRun Air Duct Cleaning Fairfax serves the full Fairfax County corridor and surrounding communities, including Dryer Vent Cleaning in Reston and Dryer Vent Cleaning in Centreville, as well as Herndon, Arlington, Alexandria, Sterling, Manassas, Ashburn, Washington, Rockville, and Silver Spring. Most Fairfax appointments are scheduled within a 3-5 day window, with routing optimized to minimize drive time from our base near the intersection of I-66 and Route 50. If you’re in a neighboring city and unsure whether we cover your address, call (571) 526-0015; our live answering staff confirms coverage and availability without transferring you to a booking system.
Serving Fairfax, VA - Our Local Coverage Area
We’re based in the Fairfax area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Dryer Vent Cleaning in Fairfax

Dryer vent cleaning is the professional removal of lint and debris from the full exhaust duct that runs from your dryer to the exterior of your home, while the lint trap only catches material from a single load. The vent duct accumulates fine particles that pass through the screen, along with lint that escapes during trap removal, creating a fire hazard and efficiency loss that the trap cannot address. CleanRun’s service cleans the entire path with rotary brushes and negative-pressure extraction, then documents the results photographically.
A standard dryer vent cleaning takes 60-90 minutes from arrival to final verification, though complex jobs with roof terminations or rerouting needs may extend to two hours. We schedule adequate time for documentation and do not rush the verification step; the photo record and airflow measurement are non-negotiable parts of our process. You’ll know the expected duration when you receive your written scope.
Most Fairfax homeowners pay between $180 and $340 depending on vent length, elbow count, and access difficulty, with single-story straight runs at the lower end and roof-terminated or rerouted systems at the upper end, for our Dryer Vent Cleaning in Fairfax. Every price is delivered in writing before work begins under Haven Standard Clause 1, with no per-vent charges or post-arrival add-ons. Call (571) 526-0015 for a free written estimate specific to your home.
Yes. We service all major dryer brands including Whirlpool, Maytag, LG, Samsung, GE, Bosch, Electrolux, and Miele, and we carry transition fittings and elbows matched to common configurations. The vent cleaning process is independent of dryer electronics; we work on the exhaust path, not the appliance controls. If your installation is non-standard, the initial inspection will identify what’s needed and the price will reflect it.
We do not advertise same-day or emergency dispatch because dryer vent cleaning is a scheduled maintenance service, not an emergency response. However, if you are experiencing a burning smell or your dryer has shut down due to overheating, call (571) 526-0015 and we will prioritize your appointment within our available slots and advise on immediate safety steps. For confirmed fire conditions, contact Fairfax County Fire and Rescue first.
Every dryer vent cleaning is backed by CleanRun’s 365-Day Done Right Promise: if the work is not right, we make it right, documented in writing on every job. This is not a manager-discretionary policy but a written guarantee. Haven Standard Clause 4 requires that we retain your job record, including photos, for the full warranty period so any concern can be verified against the original documentation.
Clear a path to the dryer and remove items stored on top of or immediately beside it; our technician needs workspace to disconnect the transition duct and access the rear panel. If your dryer is in a tight closet, consider pulling it forward slightly if you’re comfortable doing so, though our technicians are equipped to handle standard access constraints. We do not need you to pre-clean or move the appliance yourself; the scope includes full reconnection and operational verification before we leave.
Schedule Your Dryer Vent Cleaning Service in Fairfax Today
Call (571) 526-0015 to speak with a live person, 24 hours a day, and request your free written estimate. You’ll receive a documented scope, a flat price per system with no per-vent charges, and the assurance that every technician arriving at your Fairfax home is background-checked, uniformed, and operating under the full H.A.V.E.N. Standard. The 365-Day Done Right Promise and Documented Photo Record are included on every job, not offered as extras. If you have a competitor’s written estimate, ask about our Free Second Opinion; we’ll put our number next to it, in writing, with no obligation.
Written by Tomas Reyes, Owner at CleanRun Air Duct Cleaning Fairfax, serving Fairfax, Reston, Centreville, and surrounding communities since 2013.




Before
After
Before
After